Chaparral FS2620R manual Restarting the Router

FS2620R Rack Model User’s Guide

This screen allows you to set the SNMP trap host, enable the traps, and read or write to the SNMP community (refer to your LAN system administrator for assistance in reading or writing to SNMP community).

Restarting the Router

Option 4 from the Network Management System Console screen restarts the router. A screen will display notifying you that your system is restarting.

Note: After rebooting the LAN connection you can return to the Password screen by disconnecting and reconnecting the Telnet session.

System Information screen

Option 5 from the Network Management System Console screen displays the About Network Interface screen displays.

You can view this read-only screen to get information about the system.

Returning to the Router Administrator Software

Press Esc from the Network Management System Console screen to return to the Router Administration software. The Chaparral FC-to-SCSI Router Administrator screen displays.

3-8