FS2620R Rack Model User’s Guide | Chaparral specs

FS2620R Rack Model User’s Guide

3Select the SCSI channel (0-5) whose SCSI ID you want to change and press Enter. The Channel screen displays.

4Select the SCSI ID (Initiator ID) you want to use for this channel and press Enter. Depending on the model you have, other screens may display.

The Disable Domain Validation screen displays. The current setting is marked with an * next to it.

5Select the option you want and press Enter.

Domain validation—You can enable or enable this function that checks for disk channel hardware and cable problems to ensure that you can run at Ultra160 speed. Some drives do not support this function and return false problems. You should disable the function for in those situations.

The system confirms that you want to make the change.

6Select Yes and press Enter to make the changes.

The system confirms that the changes are made.

7Press Enter to return to the Configuration Menu.

3-18

Image 48

Chaparral manual FS2620R Rack Model User’s Guide

Contents

User’s Guide Page Copyright Canadian Compliance Statement Safety Page Contents Address and Device Mapping Reference Documents FS2620R Rack User’s Guide Viii Introduction About this Guide Chaparral FS2620R Router Benefits and Features ConventionsBold Chaparral FS2620R Router Benefits and Features About Serverless Backup and Restore Specifications Physical Environmental Unpacking the Router To unpack the router Installing the Router Installing on a DesktopInstalling in a Rack To install the FS2620R on a desktop Connecting the Router To install the router in a rack Connecting to the Scsi Channels Rear panel components Connecting to the Fibre Channel Port To connect devices to the Scsi channelsTo connect to the Fibre Channel port Connecting to the RS-232 Port To connect to the RS-232 port Powering Up All Devices Connecting to the Ethernet PortTo power up Scsi devices To connect to the Ethernet port Understanding the LED Status Lights To make the host FC connection Description Color Function Label Router Default Settings Setting Default For more information, see Installation Configuration Examples Simple loop configuration example Multiple servers on a SAN FC-AL Multiple SANs with fabric FC-SW Combination loop and switch configuration Configuring the Router Accessing the Router Administrator Software FS2620R Rack Model User’s Guide Accessing the Router Administrator Using the Ethernet Port FS2620R Rack Model User’s Guide Configuring the Router’s Network Settings System Configuration Screen Snmp Configuration Screen Restarting the Router Navigating the Router Administrator Software To access the network management system Menu Tree illustrates the main menu options and sub-options Changing Router Configuration Changing the Screen Display Configuring the FC Host Channels To configure an FC host channel Select Enabled or Disabled and press Enter Changing Router Configuration System confirms that you want to make the changes Changing the Scsi ID Assigned to Each Router Channel To change the Scsi ID assigned to a Scsi channel FS2620R Rack Model User’s Guide Setting the Date and Time To set the router’s date To set the router’s time Changing the Scan Delay Enabling and Disabling the AlarmTo change the scan delay To enable or disable the alarm Alarm threshold What to do when the alarm sounds Rebooting the Router Restoring the Default SettingsTo restore the default settings Select Restore Defaults and press Enter Changing the Mapping Mode Auto or Fixed To change the mapping modeChanging and Displaying Device Information Select Mapping Mode press Enter Changing Device Addresses FC LUNs See Changing the Mapping Mode Auto or Fixed on To change the device FC LUNs Changing Addressing Method Displaying the Devices Connected to the RouterSelect Addressing Method and press Enter Displaying the FC-to-SCSI Address Map To display the devices connected to the routerTo display the address map Displaying Router Information Displaying the Event Log To display one event at a time Select View Event Log and press Enter Capturing the Event Log File To display a full page of events Displaying Hardware and Configuration Information To capture the event log file Gbic To display hardware information only To display hardware and configuration information Displaying the Router’s FC LUN To display the router’s LUNSelect Display Address Map and press Enter To upgrade the router’s firmware Upgrading FirmwareUpgrading the Controller’s Firmware To upgrade the Ethernet card’s firmware Upgrading LAN Firmware Upgrading Firmware FS2620R Rack Model User’s Guide Problems During Bootup Chaparral Technical Support FS2620R Rack Model User’s Guide To restore the default configuration Select 2. Clear Configuration and press Enter Terminal Emulator and COM Port Problems Solution Device Scsi Channel Problems Router is Not Responding Setting Up Debug Logging To set up debug logging Using the Loader Diagnostics Menu Using the Loader Utility MenuVoltage and Temperature Errors and Warnings FS2620R Rack Model User’s Guide Address and Device Mapping Loop ID to Alpa Mapping Device ALP 114 115 116 117 118 119 120 121 122 100 123 101 124 102 125 Configuring the Router for TCP/IP Using Address Resolution Protocol Dynamic Host Configuration Protocol Configuration To use ARP to resolve addresses in WindowsArp -s IP address 005013fx-xx-xx Simple Network Management Protocol Configuration To discover which IP address was assigned to the router FS2620R Rack Model User’s Guide Reference Documents Standards Books SBP Glossary G6322/G7324 User’s Guide Glossary G6322/G7324 User’s Guide Index Dhcp Page FS2620R Rack Model User’s Guide TCP/IP FS2620R Rack Model User’s Guide