![](/images/new-backgrounds/1231981/23198175x1.webp)
9.Insert the upper part of the diagonal belt inside the S1 guide, placing it exactly as shown in diagram 35.
10.Pull the safety belt in the direction shown in diagram 35 firmly, to tighten also the last part of the belt.
11.Check that the child car seat is fitted cor- rectly (diag. 36).
WARNING: PLEASE READ THESE INSTRUC- TIONS TO ENSURE THE CHILD CAR SEAT IS FITTED CORRECTLY
WARNING! To ensure your child’s safety, after fitting the child car seat ALWAYS check that:
-The vehicle safety belt is not twisted at any point.
-The safety belt is tightened correctly in all its parts.
-At the end of the operations described abo- ve, the child car seat must be tightly fitted to the car seat. If the child car seat is not tightly and safely fitted to the car seat, re- peat the installation.
SEATING THE CHILD IN THE CHILD CAR SEAT
-Before sitting your child in the child car seat, press the harness adjustment button and, at the same time, hold the two chi- ld car seat harnesses under the shoulder straps, and pull them in your direction to slacken them (diagram 37).
-Unfasten the buckle of the child car seat harnesses by pressing the red button (dia- gram 38), and pull the harnesses in an outward direction. Now the child can be placed in the child car seat (diag. 39).
WARNING! Always check that the child is sitting with its back correctly placed again- st the backrest of the child car seat (diag. 40).
-Position the crotch strap correctly, take the
harnesses, overlap the two buckle straps (diag. 41a - 41b) and push them together firmly inside the buckle slot, until a “click” is heard (diag. 42).
To ensure maximum safety, the two buckle straps have been designed so as to prevent the fastening of a single strap.
ADJUSTING THE PADDED HEADREST AND HARNESSES
The height of the headrest and restraint har- nesses can be simultaneously adjusted to 6 positions by pressing the button located at the rear.
WARNING! To adjust them correctly, the headrest must be fitted so as to allow that the harnesses come out from the backrest at the height of the child’s shoulders (diag. 43).
To adjust the height, press the adjustment button (M), located at the rear of the back- rest (diag. 44) and, at the same time, slide the headrest until the desired position is reached (diag. 45). Release the button and ease the headrest until a click is heard, indicating that it is locked correctly into position.
To tighten the restraint harnesses of the child car seat, pull the adjustment strap of the re- straint harnesses (diag. 46), until they are cor- rectly fitted to the child’s body.
After tightening the restraint harnesses, hold the shoulder straps and pull them in a down- ward direction to adjust the harnesses to the child’s body.
CAUTION! Do not
WARNING! Ensure that the harnesses are not twisted, especially on your child’s abdomen.
ADJUSTING THE INCLINATION OF THE CHI- LD CAR SEAT
The child car seat can be reclined to 5 posi- tions.
To adjust the inclination of the child car seat, pull the lever located under the seat (Q) in your direction (diag. 47).
WARNING! After adjusting the child car seat to the desired position, first release the lever, and then continue to move the seat until a click is heard, indicating that the lever is locked correctly.
WARNING! After adjusting the child car seat to the desired position, always check that the cars safety belts are tightened correctly around the child car seat.
WARNING! During the adjustment operations, ensure that no mobile parts come into contact with the child or other children in the car.
MAINTENANCE
The cleaning and maintenance operations must only be carried out by an adult.
How to Clean the Fabric cover
The child car seat’s fabric cover can be re- moved and cleaned by hand or in a washing machine at 30°C. Please refer to the care label for instructions on cleaning the seat fabric. Never use abrasive detergents or solvents. Do
38