not spin dry the fabric cover, let it dry without wringing.
The fabric cover must only be replaced with another cover approved by the manufacturer, since it is an integral part of the child car seat and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child car seat, never use it without its fabric cover.
To take off the fabric cover, first remove the restraint harnesses as follows:
-Press the restrain harnesses adjustment button and, at the same time, hold the two harnesses of the child car seat, located under the shoulder straps, and pull in your direction to loosen them (diag. 37).
-Unfasten the restraint harness, pressing the red button on the buckle (diag. 38).
-Remove the two harness straps from the plate (diag. 48).
-Pull the harnesses from the front to remo- ve them from the headrest and shoulder straps (diag. 49).
-Remove the headrest cover, the shoulder straps and the child car seat cover.
To replace the fabric cover and harnesses, pro- ceed as follows:
-Fit the headrest cover, the shoulder straps and the child car seat cover.
-Insert the two harness straps, first in the fabric cover holes (diag. 50), then through the shoulder straps and the headrest holes (diag. 51).
-Insert again the two harness straps in the plate (diag. 52), and check that both the plate and harness straps are positioned as shown in diag. 53.
WARNING! Check that the harnesses are not twisted.
WARNING! Check that plate is always placed correctly in the appropriate lower housing of the seat (diag. 54).
How to Clean the Plastic or Metal Parts Clean the plastic and coated metal parts only with a damp cloth.
Never use abrasive detergents or solvents. The movable parts of the child car seat must not be lubricated.
Checking the Condition of the
Components
It is recommended to check regularly the con- dition of the following components to ensure that they are not damaged or worn out:
•Fabric cover: Check that the padding does not come out from the seams. Check the condition of the seams: they must always be intact and undamaged.
•Harnesses: Check that the fabric weft is not frayed or the harness strap worn out in the parts corresponding to the adjustment strap, crotch, shoulders and harness adju- stment plate.
•Plastic parts: Check that the plastic parts are not worn out, damaged or faded.
CAUTION! If the child car seat is deformed or worn out, it must be replaced: it may no longer comply with the original safety standards.
Storing the Product
When it is not fitted into the car, it is rec- ommended to store the child car seat in a dry place, away from sources of heat and to protect it from dust, humidity and direct sun- light.
Product Disposal
When the child car seat no longer complies with the original safety standards, interrupt its use and dispose of it at an appropriate col- lection point. Dispose of the product as laid down in the environmental norms in force in the Country of use.
FOR FURTHER INFORMATION,
PLEASE CONTACT:
Chicco UK Ltd
Prospect Close
Lowmoor Road Business Park
Kirkby in Ashfield
Nottinghamshire NG17 7LF
Customer Services Helpline
Tel: 01623 750870
www.chicco.com
39
