4-3
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE Running the BIOS Setup Utility
Running the BIOS Setup Utility for the CDE100
Perform the following steps to run the BIOS setup utility for the CDE100:
Step 1 Power on the CDE100.
Step 2 Insert the CD with the CDS image into the internal CD-ROM drive.
Step 3 Reboot the CDE100 and wait for the initial BIOS screen to appear.
Note Step 4 through Step 16 are required only for the initial installation. The BIOS setup does not need to be
changed for the second and subsequent installations or recovery.
Step 4 To enter the BIOS Setup menu, press Delete as instructed at the bottom of the BIOS screen. The Main
menu appears (see Figure 4-1).
Figure 4-1 Main Menu
Tip If you are viewing the initial BIOS screen through a remote terminal server, Ctrl-Backspace functions
the same as the Delete key.
Step 5 From the Main menu, choose Boot and press Enter. The Boot Settings menu appears (see Figure 4-2).