Chapter 3 Installing the Content Delivery Engines
Installing the CDEs
Figure 3-5 CDE400 or CDE400 ISV Connector Locations
4 | 5 | 6 | 7 |
| 8 |
|
|
|
| eth4 |
|
|
|
|
| eth5 |
|
|
|
|
| eth6 | eth2 |
3 |
|
|
| eth7 | eth3 |
|
|
|
| ||
2 |
|
|
|
|
|
1 |
|
|
|
| 270604 |
|
|
|
|
|
1 | Power connectors | 5 | VGA interface |
|
|
|
|
2 | Mouse connector | 6 | Management Interface (eth0) |
|
|
|
|
3 | Keyboard connector | 7 | Ingest Interface (eth1) |
|
|
|
|
4 | Serial console interface | 8 | Cache/Stream interfaces (eth2 through eth7) |
|
|
|
|
Connecting Network Cables
Using the topology prescribed for the application, attach Ethernet cables to the Ethernet interfaces on the CDEs (see Figure
SE and SR System
In a system that uses SEs and SRs that are collocated, the Ethernet cables are used to make the following physical connections:
•SR to switch
•SE to switch
•CDSM to switch
Vault and Streamer System
In a system that uses Vaults and Streamers that are collocated, the Ethernet cables are used to make the following physical connections:
•Vault to switch
•Streamer to switch
•CDSM to switch
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
|
| |
|
