Preface
Chapter | Description |
|
|
Chapter 4, “Installing the Internet Streamer CDS | Describes the initial installation of the CDS |
Software and Initially Configuring a CDE” | Release |
| CDEs, and the initial configuration of the CDEs |
| using the Content Delivery System Manager |
| (CDSM). |
|
|
Chapter 5, “Hardware Troubleshooting” | Presents troubleshooting procedures for the CDS. |
|
|
Appendix A, “Technical Specifications” | Describes the specifications of the CDEs. |
|
|
Appendix B, “Connector Pin Assignments” | Lists the connector pin assignments for the CDEs. |
|
|
Appendix C, “CDEs with Serverworks Chipset” | Describes the specifications and connector pin |
| assignments of the servers with the Serverworks |
| chipset. |
|
|
Appendix D, “Connecting DC Power” | Provides the information for connecting DC |
| power to a CDE. |
|
|
Objectives
This guide documents the hardware features of the Cisco Content Delivery System (CDS) Release
This guide does not describe system messages that you may receive and provides only initial configuration procedures. For more information, see the “Related Documentation” section on page viii.
Audience
This guide is for the networking or computer technician responsible for installing the Cisco CDS hardware. You should be familiar with the concepts and terminology of Ethernet and local area networking.
Related Documentation
These documents provide complete information about the CDS and are available from the Cisco.com site:
•Release Notes for the Cisco Internet Streamer CDS 2.0
•Release Notes for the Cisco Internet Streamer CDS 2.1
•Cisco Internet Streamer CDS
•Cisco Internet Streamer CDS
•Cisco Internet Streamer CDS
•Cisco Content Delivery System 2.x Documentation Roadmap
•Regulatory Compliance and Safety Information for the Cisco Content Delivery Engine 100/200/300/400
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
| viii |
|
|
|
|
