TN3270 Server Commands 21
dlus-backup
dlus-backup
Use thedlus-backup DLUR configuration command to specify a backup DLUS for the DLUR
function. Use theno form of this command to remove a backup DLUS name.
dlus-backupdlusname2
nodlus-backup
Syntax Description
Default
No backup DLUS is specified.
Command Mode
DLUR configuration
Usage Guidelines
Onlyone backup DLUS can be specified per CIP. If the backup DLUS specified in the dlus-backup
command is in use when ano dlus-backup is issued, the connection is not torn down.
Severalparameters in the DLUR configuration mode consist of fully qualified names, as defined by
theAPPN architecture. Fully qualified names consist of two case-insensitive alphanumeric strings,
separatedby a period. However, for compatibility with existing APPN products, including VTAM,
thecharacters “#” (pound), “@” (at), and “$” (dollar) are allowed in the fully qualified name strings.
Eachstring is from one to eight characters long; for example, RA12.NODM1PP. The portion of the
name before the period is the NETID and is shared between entities in the same logical network.
Example
The following command specifies SYD.VMX as the backup DLUS:
dlus-backup SYD.VMX
dlusname2 Fully qualified name of the backup DLUS for the DLUR.