Cisco Systems 11.0 BT manual Show extended channel tn3270-server dlur

show extended channel tn3270-server dlur

show extended channel tn3270-server dlur

Use the show extended channel tn3270-server dlur privileged EXEC command to display information about the SNA session switch.

show extended channel slot/2 tn3270-server dlur

Syntax Description
slot/2	Specifies a particular CIP in the router where slot is the slot number.
	The port value for a TN3270 server will always be 2.
Command Mode
Privileged EXEC

Sample Display

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server dlur command:

router# show extended channel 3/2 tn3270-server dlur
dlur MPX.GOANCP
current dlus MPX.NGMVMPC		dlur-dlus status ACTIVE
preferred dlus MPX.NGMVMPC		backup dlus MPX.NGMVMPB
preferred server MPX.NGMVMPA
lsap token-adapter	0 5C	vrn MPX.LAN4	status ACTIVE
link P390		remote 4000.7470.00e7 08	status ACTIVE

Table 7 describes significant fields in the display.

Table 7 Show tn3270-server dlur Field Descriptions

Field	Description
DLUR fq-luname	Fully qualified CP name used by the SNA session switch and the
	LU name for the DLUR function configured as the fq-cpnameon
	the dlur statement.
CURRENT DLUS fq-luname	Name of the currently active DLUS, either the primary DLUS or
	the backup DLUS.
DLUR-DLUS STATUS	Possible DLUR-DLUS status values and their meanings are:
dlur-status	• reset—The DLUR-DLUS pipe is reset.

•pnd-actv—The DLUR-DLUS pipe is pending active.

•active—The DLUR-DLUS pipe is active.

•pnd-inac—The DLUR-DLUS pipe is pending inactive.

PREFERRED-DLUS fq-lunameName of the DLUS as configured on the DLUR statement.

BACKUP-DLUS fq-luname	Name of the DLUS that is used if the preferred DLUS is
	unavailable.
PREFERRED SERVER	Fully qualified name of the preferred network node server.
fq-luname
LSAP	Configured value for the local SAP on the configured internal
	adapter. Token-adapter specifies the type of internal adapter used.

42TN3270 Server Commands