Cisco Systems 11.0 BT manual Show tn3270-server client-ip-address Field Descriptions, LU locaddr

show extended channel tn3270-server client-ip-address

	sdt req
	unbind req
	Client disconnect req
	notify resp
	warm actpu req
OUT	len=28	2Cxxxxxxxx16038100F14011C3F0
IN	len=9	2C0001040016838100
OUT	len=35	2Dxxxxxxxx3D6B80003201000000
IN	len=10	2D000104043DEB800032
OUT	len=132	2Cxxxxxxxx0303800005C21D607C
IN	len=9	2C0000040003838000
IN	len=20	xxxxxxxxxx110B80008106200C0600
OUT	len=12	2Cxxxxxxxx118B8000810620

Table 6 describes significant fields in the display.

Table 6 Show tn3270-server client-ip-address Field Descriptions

Field	Description
LU locaddr	LOCADDR of the LU.
LU lu-name	If the PU is directly connected, then the name shown is the one
	generated by the seed. If DLUR, then only the unqualified portion
	is shown. The NETID portion will be the same as the current
	DLUS.
CLIENT-IP:TCP	Client’s IP address and TCP port number
ip-addr:tcpport
STATE lu-state	The LU state and their meanings are:
	•	unknown—LU in an undefined state.
	• inactive—LU didn’t receive ACTLU.
	• active—LU received ACTLU and acknowledged positively.
	•	p-sdt—LU is bound but there is no SDT yet.
	•	act/sess—LU is bound and in session.
	•	p-actlu—Telnet connects in and is waiting for ACTLU.
	•	p-ntf/av—Awaiting host notify-available response.
	•	p-ntf/ua—Awaiting host notify-unavailable response.
	• p-reset—Awaiting a buffer to send DACTLU response.
	• p-psid—Awaiting NMVT Reply PSID response.
	•	p-bind—Waiting for host to send bind.
	•	p-unbind—Awaiting host unbind response.
	•	wt-unbnd—Waiting for client to acknowledge disconnection.
	•	wt-sdt—Waiting for client to acknowledge SDT.
MODEL model	3278 model type of client; blank if STATIC LU.
FRAMES IN number	Number of frames sent inbound to the host.
FRAMES OUT number	Number of frames sent outbound from the host.
IDLE FOR time	Time the client has been idle. The time is in HH:MM:SS.
PU IS pu-name	Name of the PU.
LU IS type	Whether LU is DYNAMIC or STATIC.
NEGOTIATED type	Whether client is TN3270 or TN3270E.

40TN3270 Server Commands