Cisco Systems 11.0 BT manual Show extended channel tn3270-server client-ip-address

show extended channel tn3270-server client-ip-address

show extended channel tn3270-server client-ip-address

Use the show extended channel tn3270-server client-ip-address privileged EXEC command to display information about all clients at a specific IP address.

show extended channel slot/2 tn3270-server client-ip-address ip-address

Syntax Description
slot/2	(Optional) Specifies a particular CIP in the router where
	slot is the slot number. The port value for a TN3270 server
	will always be 2.
ip-address	IP address of the client.
Command Mode
Privileged EXEC

Sample Display

The following is sample output on the Cisco 7000 from the show extended channel tn3270-serverclient-ip-addresscommand:

router# show extended channel 3/2 tn3270-server client-ip 171.69.136.130

lu	name	client-ip:tcp		state	model	frames in out		idle for
1		171.69.136.130:3736		INACTIVE 327904E		23	18	3:37:58
pu is TN3PU02, lu is DYNAMIC type 0, negotiated TN3270
bytes 509 in,			3438 out; RuSize 0 in, 0 out; NegRsp 0 in, 0 out
pacing window			0 in, 1 out; credits 0 in, queue-size 0 in, 0 out
traces:
	dynamic timer expired
	warm		actpu req
	warm		actpu req
	warm		actpu req
	warm		actpu req
	warm		actpu req
	warm		actpu req
	warm		actpu req
IN	len=9	2C0001010009838100
OUT	len=15	2Cxxxxxxxx0A038120F3000501FF
IN	len=9	2C000101000A838100
IN	len=170	xxxxxxxxxx0403922088000D818080
OUT	len=1730	2Cxxxxxxxx0B0381207EC3110000
IN	len=9	2C000101000B838100
OUT	len=55	2Dxxxxxxxx276B8000320F000000
IN	len=10	2D000101D427EB800032
lu	name	client-ip:tcp		state	model	frames in out		idle for
4		171.69.136.130:4074		INACTIVE 327904E		77	58	6:49:55
pu is TN3PU02, lu is DYNAMIC type 0, negotiated TN3270
bytes 1308 in, 21068 out; RuSize 0 in, 0 out; NegRsp 0 in, 0 out
pacing window			0 in, 1 out; credits 0 in, queue-size 0 in, 0 out
traces:
	Reply PSID pos rsp
	actlu req
	bind		req

TN3270 Server Commands 39