Cisco Systems 11.0 BT The resulting conguration from the initial conguration and the conguration dialog follows:

18 Configuring TN3270 Server on the Channel Interface Processor
TN3270 Configuration Task List
! create direct pus for the non-APPN Host
! note that they must use different lsaps because they go to the same Host
router(cfg-tn3270)#pu pu3 05d00001 10.10.20.5 tok 1 24 rmac 4100.cafe.0001 lu-seed pu3###
router(tn3270-pu)#pu pu4 05d00002 10.10.20.5 tok 1 28 rmac 4100.cafe.0001 lu-seed pu4###
router(tn3270-pu)#end
The resulting configuration from the initial configuration and the configuration dialog follows:
interface Channel2/2
ip address 10.10.20.126 255.255.255.128
no ip redirects
no ip directed-broadcast
ip pim query-interval 0
ip igmp query-interval 0
no ip route-cache
no keepalive
no clns checksum
clns congestion-threshold 0
clns erpdu-interval 0
clns rdpdu-interval 0
no clns route-cache
no clns send-erpdu
no clns send-rdpdu
lan TokenRing 0
source-bridge 223 1 2099
adapter 0 4100.cafe.0001
llc2 N1 2057
adapter 1 4100.cafe.0002
llc2 N1 2057
tn3270-server
pu PU3 05D00001 10.10.20.5 token-adapter 1 24 rmac 4100.cafe.0001 lu-seed PU3###
pu PU4 05D00002 10.10.20.5 token-adapter 1 28 rmac 4100.cafe.0001 lu-seed PU4###
dlur SYD.TN3020 SYD.VMG
lsap token-adapter 1
vrn SYD.LAN4
link HOSTB rmac 4000.7470.0009
link HOSTA rmac 4100.cafe.0001 rsap 08
pu PU0 05D99001 10.10.20.1
pu PU1 05D99002 10.10.20.1
pu PU2 05D99003 10.10.20.2