unbind-action

unbind-action

Use the unbind-actionTN3270 configuration command to select what action to take when the

TN3270 server receives an UNBIND. Use the no form of this command to restore the default.

unbind-action {keep disconnect} no unbind-action

Syntax Description

 

keep

No automatic disconnect will be made by the server upon

 

receipt of an UNBIND.

disconnect

LUT2 session clients will be disconnected upon receipt of

 

an UNBIND. LUT1 and LUT3 session clients are not

 

automatically disconnected.

Defaults

In TN3270 configuration mode, the default is disconnect.

In PU configuration mode the default is the value currently configured in TN3270 configuration mode.

Command Modes

TN3270 configuration

PU configuration

Usage Guidelines

The unbind-actioncommand can be entered in either TN3270 configuration mode or PU configuration mode. A value entered in TN3270 mode applies to all PUs for that TN3270 server, except as overridden by values entered in PU configuration mode. The unbind-actioncommand affects currently active and future TN3270 sessions

The no unbind-actioncommand entered in PU configuration mode removes the override.

The unbind-actioncommand affects currently active and future TN3270 sessions.

Example

The following command prevents automatic disconnect:

unbind-action keep

TN3270 Server Commands 55

Page 55
Image 55
Cisco Systems 11.0 BT manual Unbind-action