Cisco Systems 11.0 BT specification

link

The following example shows different adapter numbers conﬁgured on the same internal LAN to avoid SAP contention. The host uses SAP 4 on token ring adapter 0:

lan tokenring 0 adapter 0 4000.0000.0001 adapter 1 4000.0000.0002

tn3270-server dlur ...

lsap token-adapter 1

link HOST rmac 4000.0000.0001 rsap 4

TN3270 Server Commands 27

Image 27

Cisco Systems 11.0 BT manual Lsap token-adapter Link Host rmac 4000.0000.0001 rsap

Contents

January 15 Introduction Release NoteIntroduction Cisco IOS Packaging Boot ROM RequirementsCIP Boot Image Requirements Platform Support Microcode Software New Software Features in 11.010BT Update to Conﬁguration Guide Conﬁguring TN3270 Server on the Channel Interface Processor Formation of LU Model Type and Number Configuring TN3270 on a Channel Interface ProcessorConﬁguring TN3270 on a Channel Interface Processor Dynamic LU Allocation Speciﬁc LU Allocation Examples of Model String MappingString from client Ascii Requested? String to Host Ebcdic IP-address Type Number SNA Session Switch-End Node DlurMultiple Hosts Support Direct PU Conﬁguration in Router Adapte Comman Name IDBLK=05D TN3270 Configuration Modes Task CommandTN3270 Conﬁguration Modes Dlur Conﬁguration Mode TN3270 Server Conﬁguration Mode Dlur SAP Conﬁguration Mode PU Conﬁguration ModeCommands Allowed in Multiple Modes Task List for Non-APPN Hosts TN3270 Configuration Task ListTN3270 Conﬁguration Task List Task List for Multiple Appn Hosts Conﬁgure PU Parameters on the TN3270 Server Conﬁgure TN3270 Server TN3270 Configuration Task List Command Conﬁgure DlurConﬁgure SAPs under Dlur Conﬁgure PUs under Dlur Monitor the TN3270 ServerPu pu-name idblk-idnum ip-address Conﬁguration dialog to conﬁgure the TN3270 function follows TN3270 Conﬁguration Example SYD.TN3020 SYD.VMG Update to Command Reference Update to Command Reference Dlur Dlur Dlus-backup Dlus-backup Generic-pool Generic-pool Following command permits generic LU pool use Idle-time Idle-time Keepalive Keepalive Link Link Lsap token-adapter Link Host rmac 4000.0000.0001 rsap 4. It must be unique within the internal adapter in that no LsapLsap Internal adapter type on the CIP card, which corresponds to Related Commands Maximum-lus Maximum-lus Preferred-nnserver Preferred-nnserver PUs may use the same value on the internal adapter as long Pu directPu direct Hosts are in which domains and does not enforce the unique When a speciﬁc LU name request is needed. The format can Defaults 34 TN3270 Server Commands Pu Dlur Pu DlurThis value must match the idblk-idnum value deﬁned at LU number Show extended channel tn3270-serverShow extended channel tn3270-server Show tn3270-server Field Descriptions Dlus fq-dlusname Fail numberNumber Dlur fq-cpname 38 TN3270 Server Commands Show extended channel tn3270-server client-ip-address Show extended channel tn3270-server client-ip-address Ip-addrtcpport State lu-state Show tn3270-server client-ip-address Field DescriptionsLU locaddr LU lu-name Number/number Show extended channel tn3270-server dlur Show extended channel tn3270-server dlurShow tn3270-server dlur Field Descriptions VRN fq-name TGN tg-number Show extended channel tn3270-server dlurlinkShow extended channel tn3270-server dlurlink Show tn3270-server dlurlink Field Descriptions Show extended channel tn3270-server pu Show extended channel tn3270-server pu State pu-state Show tn3270-server pu Field Descriptions LU states and their meanings are Show extended channel tn3270-server pu lu Show extended channel tn3270-server pu lu Show tn3270-server pu lu Field Descriptions 50 TN3270 Server Commands Shutdown Shutdown Tcp-port Tcp-port Timing-mark Timing-mark Tn3270-server Tn3270-server Unbind-action Unbind-action Vrn Vrn Cisco Connection Online Cisco Connection DocumentationCisco Connection Online Cisco Connection Documentation