show extended channel tn3270-server dlurlink

show extended channel tn3270-server dlurlink

Use the show extended channel tn3270-server dlurlink privileged EXEC command to display information about the DLUR components.

show extended channel slot/2 tn3270-server dlurlink name

Syntax Description

 

slot/2

Specifies a particular CIP in the router where slot is the slot number.

 

The port value for a TN3270 server will always be 2.

name

Name of the SNA session switch link to be displayed.

Command Mode

 

Privileged EXEC

 

Sample Display

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server dlurlink command:

router# show extended channel 3/2 tn3270-server dlurlink P390

lsap

token-adapter

0 5C vrn MPX.LAN4

status ACTIVE

link

P390

remote 4000.7470.00e7 08

status ACTIVE

partner MPX.NGMVMPC

tgn 1

maxdata 1033

Table 8 describes significant fields in the display.

Table 8 Show tn3270-server dlurlink Field Descriptions

Field

Description

LSAP...VRN...STATUS status

Possible sap-statusvalues and their meanings are:

 

inactive—Not connected to adapter.

 

pnd-actv—SAP activation in progress.

 

active—SAP open.

 

pnd-inac—SAP deactivation in progress.

 

 

LINK name

Name is an invented name, @DLURnn, if not a configured link.

 

 

LINK...STATUS status

Possible link-statusvalues and their meanings are:

 

inactive—Not connected to host.

 

pnd-actv—Link activation in progress.

 

active—Link active.

 

pnd-inac—Link deactivation in progress.

 

 

PARTNER name

CP name of the remote node for this link.

 

 

TGN tg-number

Transmission group number for this link. Because the SNA session

 

switch only supports 1 transmission group per pair of CP names, it

 

is typically 0 or 1.

 

 

MAXDATA maxdata

Maximum frame size allowed on this link.

 

 

 

44TN3270 Server Commands

Page 44
Image 44
Cisco Systems 11.0 BT manual Show extended channel tn3270-server dlurlink, Show tn3270-server dlurlink Field Descriptions