Cisco Systems 11.0 BT manual Show tn3270-server pu Field Descriptions, State pu-state

show extended channel tn3270-server pu

Table 9 describes significant fields in the display.

Table 9 Show tn3270-server pu Field Descriptions

Field	Description
NAME pu-name	Name of the PU as configured.
IP:TCP ip-addr:tcpport	IP address and TCP port number configured for the PU.
XID number	Configured XID - idblk and idnum.
STATE pu-state	Possible state values and their meanings are:
	•	shut—The PU is configured, but is in a shut state.
	•	reset—The link station of this PU is not active.
	•	test—PU is sending a TEST to establish link.
	•	xid—TEST is responded, XID is sent.
	•	p-actpu—The link station is up, but no ACTPU is received.
	•	active—ACTPU is received and acknowledged positively.
	• act/busy—Awaiting host to acknowledge the SSCP-PU data.
	•	wait—Waiting for PU status from CIP.
	•	unknown—Direct PU is in an undefined state.
	• p-rqactpu-r—PU is pending a request ACTPU response.
	• p-active—DLUR PU and direct PU states disagree.
	• p-dactpu—PU is pending DACTPU.
	• dlur???—DLUR PU is in undefined state.
LINK type	LINK type is either internal adapter type and internal adapter
	number or dlur if it is a SNA session switch PU.

DESTINATION mac-address or If a direct PU, then it is the destination MAC address, otherwise, it

PU-name	is the name of the partner PU.
R-LSAPnumber number	Remote and local SAP values.
IDLE-TIME number	Configured idle-time for this PU.
KEEPALIVE number	Configured keepalive for this PU.
UNBIND-ACT type	Configured unbind action for LUs on this PU.
GENERIC-POOL type	Configured generic-pool for LUs on this PU.
BYTES IN/OUT	Total number of bytes sent to/received from the host for this PU.
number/number
FRAMES IN/OUT	Total number of frames sent to/received from the host for this PU.
number/number
NEGRSP IN/OUT	Total number of SNA negative responses sent to/received from the
number/number	host.
ACTLUS number	Total number of ACTLUs received from the host.
DACTLUS number	Total number of DACTLUs received from the host.
BINDS number	Total number of BINDs received from the host.
LU number	LOCADDR of the LU.
NAME lu-name	Name of the TN3270 LU.

46TN3270 Server Commands