Note
Chapter 2 System Installation
2.3 Install AC Power Cables
Figure 2-11 Installing the 1 RU Distribution Shelf Ground
124763
2.3 Install AC Power Cables
Each rectifier in the system shelf is individually powered through a 110/230 V AC single phase 15A circuit and draws a maximum of 9.1A.
Each rectifier position in the shelf can be powered by either:
•208/220/240V AC split phase
•230V single phase
•110V single phase
•Max current per position (9.1A)
Rectifier output capacity at 110 VAC is reduced to less than half of the maximum output.
•Locate the power
•Install the system using the following electrical codes:
–United States National Electrical Code (NEC)
–Canadian Electrical Code (CEC)
Cisco AC/DC Power System User Guide, R1.0
May 2006 |
| |
|
