Cisco Systems 124778, 124792, 159330 2-15, AC cabling should be tied off inside the cabinet/rack

Chapter 2 System Installation

2.3 Install AC Power Cables

Figure 2-13 Routing AC Cables

124793

Step 8 AC cabling is routed through either side of the system shelf and secured using tie off points.

Step 9 AC cabling should be tied off inside the cabinet/rack.

Step 10 Repeat for all AC cables.

Step 11 Connect the terminated AC plug to the AC receptacle at the install location.

Note A separate AC receptacle is required for each AC cable, and each receptacle should be on its own circuit breaker to maximize protection against AC circuit breaker failure.

Cisco AC/DC Power System User Guide, R1.0

May 2006 2-15