Chapter 3 Component Replacement
3.2.5 Replace GMT Fuses
3.2.5 Replace GMT Fuses
Step 1 Locate the GMT fuse that is to be removed.
Step 2 Grasp the fuse firmly at the front and pull out (Figure
Figure 3-10 Removing a GMT Fuse
124772
Step 3 For information on installing GMT fuses, see the “2.5.1 Install GMT Fuse Connections” procedure on page
Caution When replacing GMT fuses, always use the same size fuse unless the GMT fuse output cabling is upgraded as well. For more information on the appropriate cable/fuse sizes, see Table
Cisco AC/DC Power System User Guide, R1.0
May 2006 |
| |
|
