Cisco Systems 3200 Series manual Wiring card

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure

Card Replacement Process

For a 3-WMIC configuration, connect cables to the wiring card as shown in Figure 2-12.

Figure 2-14 3-WMIC Configuration

1 2

5

3

270464

4

1	Connect FESMIC 10-pin FE1X cable to	2	Connect the FESMIC 10-pin FE2X cable to
	WMIC 3.		WMIC 2.
3	Connect the FESMIC’s 10-pin FE3X cable to	4	Connect WMIC 3 24-pin cable to port J3 on
	WMIC 1.		the wiring card.
5	Connect the WMIC 2 24-pin cable to port J2
	on the wiring card.

Step 3 Route the 20-pin LED cable over the other cables to secure them, and connect the LED cable to port J5 on the wiring card.

	Cisco 3200 Series Router Hardware Upgrade Guide
2-16	OL-15983-01