Cisco Systems 3200 Series manual Cisco 3200 Rugged Enclosure Protective End Cap Cover

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure

Card Replacement Process

Note If a protective end cap cover is used to provide weatherproof protection for the ports on the I/O end cap, align the holes of the hinge brackets of the protective end cap to the I/O end cap with the holes of the mounting bolts on the I/O end cap. Then, insert the (4) mounting bolts through the hinge bracket and I/O end cap holes to attach the I/O end cap and its protective cover to the extrusion. Figure 2-16shows the parts of a protective end cap cover.

Figure 2-16 Cisco 3200 Rugged Enclosure Protective End Cap Cover

1

5

4

2

		3	158086
1	Hinge point	2	NEC cable pass-through
3	Holes for 8/32-inch-long protective end	4	Hinge/mounting bracket
	cap cover screws
5	Mounting bolt

	Cisco 3200 Series Router Hardware Upgrade Guide
2-18	OL-15983-01