Cisco Systems 3200 Series manual Tightening Wedge Loks

Chapter 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure

Card Replacement Process

Figure 3-9 Tightening Wedge Loks

13	14
11	12
7	8
5	6
1	2
3	4
9	10
	270473

Step 12 Tighten the two Wedge Loks of the MARC on the antenna end cap side (see Figure 3-10) with a 3/32-inch hex blade. Use a torque range of 5.5–5.7 in-lb when tightening the Wedge Loks.

Figure 3-10 Sequence for Tightening Wedge Loks

1	2
	270474

	Cisco 3200 Series Router Hardware Upgrade Guide
3-10	OL-15983-01