Cisco Systems 3200 Series manual On the wiring card

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure

Card Replacement Process

For a 2-WMIC configuration, connect cables to the wiring card as shown in Figure 2-13.

Figure 2-13 2-WMIC Configuration

1 2

			3
4
		270463
1	Connect the FESMIC 10-pin FE1X cable to	2	Connect the FESMIC10-pin FE2X cable to
	port J14 on the wiring card.		WMIC 2.
3	Connect the FESMIC 10-pin FE3X cable to	4	Connect the WMIC 2 24-pin cable to port J2
	WMIC 1.		on the wiring card.

	Cisco 3200 Series Router Hardware Upgrade Guide
OL-15983-01		2-15