Chapter4 Configuring Network Settings on the Cisco IPPhone
Configuring IP Settings
4-18
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Step3 To set the route address, enter an address in the St aticRout e f ield an d cli ck Apply.
On the Cisco IP Phone 7902G, you can also review phone settings using the IVR
system. See the “Using the Interactive Voice Response (IVR) System on the
Cisco I P Phone 7902G” section on page A-22.
Using the Phone’s Network Configuration Screen (Cisco IP Phone Models 7905G/7912G)
Procedure
Step1 Press the Menu button.
Step2 Use the Navigation button to select Settings, and then press the Select softkey.
Step3 From the Settings menu, use the Navigation button to select Network
Configuration, and then press the Select softkey.
Step4 From the Network Configuration menu, press **#.
If your phone displays “Enter Admin Password,” enter your password and the n
press the Enter softkey.
Make sure that an unlocked padlock icon appears in the upper-right corner of your
LCD.
Step5 Scroll to Default Router.
Step6 Press the Edit softkey.
Step7 Use the buttons on the keypad to enter the new IP address, using the * key on the
keypad to enter periods.
Use the << softkey to correct any mistakes.
Step8 Press Validat.
Step9 Press Save.