Chapter4 Configuring Network Settings on the Cisco IPPhone
Modifying VLAN Settings
4-26
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Step3 From the Settings menu, use the Navigation button to select Network
Configuration, and then press the Select softkey.
Step4 From the Network Configuration menu, press **#.
If your phone displays “Enter Admin Password,” enter your password and the n
press the Enter softkey.
Make sure that an unlocked padlock icon appears in the upper-right corner of your
LCD.
Step5 Scroll to Admin. VLAN Id.
Step6 Press the Edit softkey.
Step7 Use the buttons on the keypad to enter the new Admin VLAN setting.
Use the << softkey to correct any mistakes.
Step8 Press Validat.
Step9 Press Save.
Disabling VLAN
You can disable or enable VLAN manually.
Using the Phone Configuration Web Page (Cisco IP Phone Models 7902G/7905G/7912G)
Procedure
Step1 Open the Phone Configuration web page.
a. Open your web browser and enter the following URL, where IPaddress is the
IP address of your phone
http://IPaddress
b. Press Enter.
The Phone Configuration web page appears.