Chapter4 Configuring Network Settings on the Cisco IPPhone
Configuring TFTP Options
4-28
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Configuring TFTP Options
If you do not use DHCP to direct the Cisco IP Phone to a TFTP server, you must
manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP. On the CiscoIP Phone 7902G, you can
manually enable or disable TFTP.
This section covers these topics:
•Assigning a TFTP Sever, page 4-28
•Enabling an Alternate TFTP Server, page 4-30

Assigning a TFTP Sever

If you are not using DHCP in your network, and you want to change thi s se tting,
you must manually assign the TFTP server to the phone.
Before you can manually assign a TFTP server, you must enable an alternate
TFTP server. For instructions, see the “Enabling an Alternate TFTP Server”
section on page 4-30.
Using the Phone Configuration Web Page (Cisco IP Phone Models 7902G/7905G/7912G)
Procedure
Step1 Open the Phone Configuration web page.
a. Open your web browser and enter the following URL, where IPaddress is the
IP address of your phone
http://IPaddress
b. Press Enter.
The Phone Configuration web page appears.
Step2 In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.