Cisco Systems 7902G, 7905G, 7912G Assigning Static IP Addresses

2-15
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Chapter2 Preparing to Install the Cisco IPPhone on Your Network Adding Phones to the Cisco CallManager Database
Step5 In the Phone Configuration window, you must enter information in the following
fields:
•MAC Address
•Device Pool
Step6 Click Insert.
The Cisco C allManager Administration application asks if you want to assign a
directory number.
Step7 To configure additional phone features, see the “Configuring Telephony Features
Using Cisco CallManager Administration” section on page 5-2 for details.
For additional information, access context-sensitive help from the application or
refer to CiscoCallManager documentation.
Related Topics
•Using Auto-Registration, page 2-12
•Assigning Static IP Addresses, page 2-15
•Using the Bulk Administration Tool, page 2-17
•Configuring Telephony Features Using Cisco Ca llManage r Administr ation,
page 5-2
Assigning Static IP Addresses
If you do not use DHCP in your network, you must assign static IP addresses to
each phone. You must configure each phone locally.
Use the following procedure as a starting point to add phones manuall y using the
Cisco C allManager Administration application.
Procedure
Step1 Log in to the CiscoCallManager Administration application.
Step2 From the menu bar, choose Device > Add a New Device.
The Add a New Device window appears.