Chapter 3 Installing Components
Installing Components Using the CLI
Step 8 Press y and Enter to continue. The program prompts you to enter the database transaction logs destination.
Step 9 To accept the default directory, /var/CSCObpr, press Enter; or enter another directory. For example:
Database Transaction Logs Destination
Logs Directory Destination
Logs Directory Destination [/var/CSCObpr] /var/disk1/CSCObpr
The program then asks you to confirm the directory.
Note By default, the installation program installs the database transaction logs directory (BPR_DBLOG) in the same directory as the data directory (BPR_DATA). Cisco Systems recommends that you locate the database transaction logs directory on the fastest disk on the system and that you ensure that the disk has 1 GB of space available.
The directory specified becomes the
Step 10 Press y and Enter to continue. The program prompts you to enter the listening port for the RDU. Step 11 To accept the default value, 49187, press Enter; or enter another port number. For example:
Regional Distribution Unit Host/Port
Enter the IP address and the listening port of the regional distribution unit(RDU)associated with this installation.
Enter the Host/IP address and address of the listening port for the RDU and RDU Listening Port [49187]
Note The installation program obtains the IP address of the RDU automatically. You do not need to enter this value.
The program then prompts you to confirm the listening port number.
Note The RDU listens on all interfaces. The listening port is the port number that the RDU uses to communicate with other BACC components, such as DPEs and Network Registrar extension points.
Step 12 Press y and Enter to continue. The program prompts you to enter the shared secret password.
Note You must use the same shared secret password for all RDUs, DPEs, and Network Registrar extension points in your network. The default password is secret.
Step 13 Enter the password that you want to use for authentication among BACC servers. For example:
Shared Secret Password
Enter the password to be used for authentication among the BPR servers.
| Cisco Broadband Access Center for Cable Installation Guide 2.7 |
|
