Cisco Systems Broadband Access Center manual Before You Begin, Upgrading the RDU

Chapter 6 Upgrading Broadband Access Center for Cable

Before You Begin

Before You Begin

The following procedure is required before upgrading all components except the RDU.

Step 1 Untar the upgrade file(27upgrade.tar) onto the computer where the BACC components reside. For example:

tar -xvf 27upgrade.tar

The component upgrade scripts are extracted to the patch27/bin upgrade folder.

Step 2 Run the backupDb.sh script to back up the RDU database files. See the Cisco Broadband Access Center for Cable Administrator’s Guide for additional information.

Upgrading the RDU

To upgrade the RDU:

Step 1 Run the setup.bin file normally associated with a new installation of BACC. The setup.bin file automatically detects the previous installation.

Step 2 When the installation program prompts you to perform the database migration procedure, run the migration script using the migrateDb.sh script as described in Migrating the RDU Database, page 6-6.

Upgrading the Solaris DPE

Complete these steps to upgrade the installed Solaris DPE component from release 2.6.x to release 2.7:

Step 1 Run this script from the upgrade folder:

./27-upgrade-dpe.sh

Step 2 You must manually restart the agent to finish the upgrade process.

An output similar to this displays.

BPR Located

BPR Home directory is /opt/CSCObpr

Current version is 2.6.(x)

DPE Component Installed

Stopping the BPR Agent

BPR Agent is stopped.

BPR Agent stopped

Copying the Upgrade Files

Upgrading Package Information

Upgrade for BPR 2.7 Completed Successfully

Please start your BPR Agent to finish the upgrade Process

Cisco Broadband Access Center for Cable Installation Guide 2.7

6-2 OL-19105-01