Cisco Systems CF2001P Setting DT-105 USA and Canada only, Connecting the Telephone Cables

CF2001P

NEXT

■Setting DT-105 (USA and Canada only)

NOTE

•For details on installing DT-105, refer to the Setup Instructions included with it.

•To set the DT-105, follow the instructions below.

•To exit the External Panel Controller, refer to step 14 on page 24.

<Connecting the Telephone Cables>

• Connect the telephone cable to the jack marked “LINE” on the data terminal.

NOTE

If the telephone cable is too short, obtain a different cable with modular plugs.

•Connection examples

<When the telephone line is only for the data terminal>

4656M007CA

<When the telephone line is for a phone and the data terminal>

4656M008CA

<When the telephone line is only for a fax, phone and data terminal>

4656M009CA

NOTE

For details on connecting the fax, refer to the manual for the fax machine.

4004-7715-01 – 36 –