CF2001P
NEXT
Protective sheet
*
7. Remove the protective tape from the imag- ing unit.
|
| NOTE | |
|
| The clear plastic protective sheet is not | |
|
| packing material; therefore, do not remove | |
|
| it. | |
C4004U193AA |
|
| |
* | The additional protective sheet, indicated by | ||
| |||
|
| the shaded area, is only attached to the | |
|
| black imaging unit. | |
| 8. | Keeping the imaging unit level, pick it up by | |
|
| supporting it on the bottom with your left | |
|
| hand and on the bottom at the front with your | |
|
| right hand. |
NOTE
Be sure to insert the imaging unit until the end of the bottom imaging unit cover con- tacts the back of the imaging unit compart- ment.
C4004U052AB
NOTE
Do not insert the imaging unit into the com- partment at an angle.
C4004U215AB
NOTE
When holding the imaging unit, be sure to hold it by its bottom cover. If the top imaging unit cover is held, it may fall off or the PC drum installed on the imaging unit may become damaged, resulting in decreased image quality.
C4004U217AB
10.While keeping the bottom of the imaging unit supported with your left hand, carefully insert the imaging unit with your right hand,
as shown, until the cartridge snaps into place.
C4004U216AB | C4004U053AB |
9.Keeping the imaging unit level, insert the imaging unit as far as possible into the imag- ing unit compartment.
Insert the imaging unit with the protective sheet(s) attached.
11.Pull out the empty imaging unit cover. The empty imaging unit cover for the black imaging unit can simply be pulled out, even if the protective sheets on the imaging unit become caught on the toner hopper lid.
C4004U051AC | C4004U054AB |
– 5 – | |
|
