CF2001P

NEXT

<Maintenance Center (Billing Center) Settings>

NOTE

The procedure for making Maintenance Center settings are described below. If Billing Center settings are necessary, specify them using the same procedure after entering the Maintenance Center settings.

<Clearing the Maintenance RAM>

1.Click [Maintenance].

(For the Billing Center, click [Billing].)

4.Click [ID Code] again so that it appears in black on a white background.

5.Click [RAM Clear].

C4656P010CA

6. Click [Yes].

7. Click [END].

C4656P003CA

C4656P011CA

2.Click [ID Code] so that it appears in white on a black background.

NOTE

For the Billing Center, there is no need to enter an ID code.

C4656P008CA

3.Using the keypad in the External Panel Controller, enter the 7-digit ID code.

NOTE

Enter the service representative’s ID code.

C4656P009CA

4004-7715-01

– 39 –

 

Page 40
Image 40
Cisco Systems CF2001P user manual Maintenance Center Billing Center Settings, Clearing the Maintenance RAM