Chapter 3 Configuring and Managing the IP Camera

Status Windows

Table 3-24

Syslog and Log Information (continued)

 

 

 

Message

 

Explanation

 

 

Audio: Disable microphone.

Captures information when audio devices are

 

 

enabled or disabled in the Audio window.

Audio: Disable speaker.

 

 

 

Audio: Enable microphone. (audio type: G.711

 

A-Law)

 

 

 

 

Audio: Enable microphone. (audio type: G.711

 

u-Law)

 

 

 

 

Audio: Enable microphone. (audio type: G.726)

 

 

 

Audio: Enable speaker.

 

 

 

DHCP: Lease release successfully.

Provides information about DHCP activities in

 

 

networks that include DHCP.

DHCP: Lease release unsuccessfully.

 

 

 

DHCP: Lease renewal successfully.

 

 

 

DHCP: Lease renewal unsuccessfully.

 

 

 

DHCP: Timeout error when renewing DHCP

 

lease.

 

 

 

 

DST: Adjust DST Number hour automatically.

The IP camera has automatically adjusted its clock

 

 

by the indicated number of hours for the beginning

 

 

or end of daylight saving time.

 

 

DST: DST begin.

The IP camera has adjusted its clock for the

 

 

beginning of daylight saving time.

 

 

 

DST: DST end.

 

The IP camera has adjusted its clock for the end of

 

 

daylight saving time.

 

 

LOG: Clear all messages.

You have used the Clear Log button to delete the

 

 

log file from the IP camera SDRAM.

 

 

LOG: Log file is full. Start to wrap around.

The IP camera SDRAM is full and existing log

 

 

information is beginning to be overwritten.

 

 

Network: Failed to get the IP address. Camera set

IP camera is unable to obtain an IP address

to default IP address.

through DHCP and is set to the default IP address

 

 

of 192.168.0.100.

 

 

Network: LAN activated.

IP camera obtained a network IP address.

 

 

Network: Link down.

IP camera lost connection to the network.

 

 

Network: Link up.

IP camera established connection to the network.

 

 

NTP: Failed to synchronize data & time with the

Provides information when you configure the IP

NTP server.

 

camera to obtains its time from an NTP server.

 

 

NTP: No NTP server specified.

 

 

 

NTP: Synchronization OK.

 

 

 

NTP: The NTP server cannot be reached.

 

 

 

 

 

 

Cisco Video Surveillance 2611 IP Dome User Guide

 

 

 

 

 

 

OL-24128-02

 

 

3-41

 

 

 

 

 

Page 65
Image 65
Cisco Systems CIVIS-IPC-2611 manual Syslog and Log Information