MPEG-4 Settings | Cisco Systems CIVIS-IPC-2611 specification

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9	Video Window Options (continued)

Option		Description

Max. Frame Rate		Choose the desired maximum frame rate per second for the primary video
		stream from the IP camera.
		The default values are 30 for NTSC and 25 for PAL.
		A higher maximum frame rate provides better video quality but consumes
		more bandwidth

H.264 Settings 2

Note These H.264 Settings 2 options appear if you choose the Dual H.264 Streams from the Streaming Mode drop-down list.

Resolution	Choose the resolution of the secondary video stream.

Video Quality Control	Choose an option for video quality for the secondary video stream from the
	IP camera:
	• Constant Bit Rate—Specifies that the video stream is output at or close
	to the constant bit rate that you choose. The default value is 64 Kbps. A
	higher bit rate provides better video quality but consumes more
	bandwidth.
	• Fixed Quality—Specifies that video is output at a fixed quality, which
	ranges from Very High to Very Low. The bit rate may vary to maintain
	this quality. The default fixed quality is Normal. A higher fixed quality
	provides better video quality but consumes more bandwidth.

Max. Frame Rate	Choose the desired maximum frame rate per second for the secondary video
	stream from the IP camera.
	The default values are 15 for NTSC or 15 for PAL.
	A higher maximum frame rate provides better video quality but consumes
	more bandwidth

MPEG-4 Settings 1

Note These MPEG-4 Settings options appear if you choose Single MPEG-4 Stream, Dual MPEG-4 Streams, or Dual Streams (MPEG-4 + MJPEG) from the Streaming Mode drop-down list.

Resolution

Choose the desired video resolution format for the primary video stream from the IP camera.

The default resolution is 720 x 480 for NTSC or 720 x 576 for PAL.

	Cisco Video Surveillance 2611 IP Dome User Guide
3-18	OL-24128-02

Image 42

Cisco Systems CIVIS-IPC-2611 manual MPEG-4 Settings

Contents

Cisco Video Surveillance 2611 IP Dome User Guide Americas Headquarters Cisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features Features, IP Camera Overview, Physical Details, Package Contents, IP Camera Overview Physical Details Top of the 2611 IP Dome Overview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2611 IP Dome Package Contents Getting Started Before Your Begin Installing the Cisco Video Surveillance 2611 IP Dome Preventing Electrostatic Discharge Damage Preparing for Installation Passing the Audio Cable through a Ferrite Core Procedure Recessed Mounting in a Ceiling Tile Placing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Accessing the IP Camera Windows Protocol//ipaddress Http//203.70.212.52 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.521024 Adjusting the Video Image Powering the IP Camera On or Off Adjusting the Camera Lens on the 2611 IP Dome Reset Type Procedure Remarks Resetting the IP CameraCleaning the IP Camera Initial Setup of the IP Camera Configuring and Managing the IP Camera Configuration Overview Configuration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsSee the Audio Window section See the Focus/Zoom Window Navigating the Configuration Windows Snmp Device Settings Setup WindowsBasic Setup Window Option Description Option Description Advanced Setup Window Network Settings Option Bonjour Option Description IP Filter Window QoS Eapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window Administrator User List Maintenance Window Firmware Window Audio/Video Windows Video Window Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for Settings MPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video stream Video Adjustment PAL/50 Hz Options Day/Night Vision Option Description Audio Window Controls section onDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , or Privacy Region WindowFocus/Zoom Window Full Duplex Talk and Listen Security Windows Initialization WindowInitialization Window, Complexity Window, Complexity Window Users Window section on Applications Windows Mail/FTP/HTTP Window Primary Smtp Server Described in the Basic Setup Window section onMail Setup Secondary Smtp Server Secondary FTP Mail BodyPrimary FTP Http Notification Motion Detection Window System-provided-name-value-pairs is the event information Event Window Clear button Event ScheduleNew Schedule Trigger Event Mail/FTP/HTTP Window section on Attachment Snmp Window Alarm Output Settings Alarm I/O Ports WindowAlarm Input Settings Manual Control Settings Status Windows System WindowSystem Status Audio Setting Audio/Video Window Network Window Syslog & Log Window Local Log Sys Log Server Log List Message ExplanationSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messages Video Log Window Smtp log messages Delete button Delete All button OL-24128-02 Viewing Video through the Home Window Overview Home Window Overview Home Window Digital zoom controls Home Window ControlsControl Description Audio controls IP camera controls Snapshot controlsSave For related information, see the Video Window section on Accessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Mjpeg Stream Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing Dual Streams H.264 + Mjpeg Accessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section on OL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8