Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-4

IP Filter Window Options (continued)

 

 

 

Option

 

Description

 

 

 

Single/Range

 

If you enable IP address filtering, choose either of the following options

 

 

from as many drop-down lists as needed:

 

 

Single—Enter an IP address that is denied or allowed access to the IP

 

 

camera, depending on the Options setting.

 

 

Range—Enter a range of IP address that is denied or allowed access to

 

 

the IP camera, depending on the Options setting.

 

 

 

EAPOL Window

The EAPOL window provides options for configuring Extensible Authentication Protocol Over LANs (EAPOL). This protocol is used to authenticate and control user traffic in an 802.1x network.

To display the EAPOL window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-8, click Setup, then click EAPOL.

If you change any options in the EAPOL window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-5describes the options in the EAPOL window.

Table 3-5 EAPOL Window Options

Option

Description

 

 

Enable EAPOL

Check this check box to enable EAPOL on the IP camera.

 

 

EAP-TLS Options

 

Note These options appear if you check the Enable EAPOL check box and then choose EAP-TLSfrom the Protocol Type drop-down list.

User ID

User identifier that is used to log in to the RADIUS server.

 

 

Root Certificate

Path and folder on this PC or location of a Windows network shared folder

 

where the root certificate file is stored. You can click Browse to find this

 

location. After you enter this information, click Upload to upload the

 

certificate from the local PC to the IP camera.

 

 

Validate Root

Check this check box if you want the identity of the RADIUS server to be

Certificate

validated.

 

 

User Certificate

Path and folder on this PC where the user certificate file is stored. You can

 

click Browse to find this location. After you enter this information, click

 

Upload to upload the certificate from the local PC to the IP camera.

 

 

Password

IP camera client log in password for the RADIUS server.

 

 

EAP-FAST Options

 

Note These options appear if you check the Enable EAPOL check box and then choose EAP-FASTfrom the Protocol Type drop-down list.

Allow Automatic PAC Provisioning

Check this check box if you want to allow authentication servers to establish a secure connection with the IP camera so that they can provide the IP camera with new Protected Access Credentials (PACs).

 

 

Cisco Video Surveillance 2611 IP Dome User Guide

 

 

 

 

 

 

OL-24128-02

 

 

3-11

 

 

 

 

 

Page 35
Image 35
Cisco Systems CIVIS-IPC-2611 manual Eapol Window, EAP-TLS Options, EAP-FAST Options