Cisco Systems CP7970GRF Choosing Touchscreen Items, Cleaning and Maintaining the Touchscreen

Choosing Touchscreen Items

There are three ways to choose items on your phone’s touchscreen.

To choose a
touchscreen item...	Do this...
By touch	Press (or tap) touch-sensitive items on the touchscreen with your fingertip.
	Use only your fingertip to press the touchscreen, as using any other objects
	could damage the display. Be aware that pressing a phone number can cause the
	phone to dial the number.
By item number	Press the corresponding number on your keypad. For example, press 4 to
	choose the fourth item in a menu.
By scrolling	Press the Navigation button to highlight an item. Press a softkey to finish the
	action, or tap the item on the touchscreen with your fingertip.

Cleaning and Maintaining the Touchscreen

You can use the Display button to disable and enable the touchscreen. The Display button illuminates to indicate changes in touchscreen status:

Green, steady—Touchscreen is in sleep mode Green, flashing—Touchscreen is disabled

If you want to...	Then...
Disable the touchscreen	Press	and hold for more than one second.		flashes.
for cleaning	The screen remains disabled for about a minute, unless you enable it.
Enable the touchscreen	Press	(flashing) and hold for more than one second.
(after disabling it)
Wake the touchscreen	Press the touchscreen or any button, or lift the handset.
from sleep mode	After a period of inactivity (determined by your system administrator),
	the touchscreen enters sleep mode to save power. In this mode, the
	touchscreen appears blank and		remains lit.

Caution Use only a soft, dry cloth to wipe the touchscreen. Do not use any liquids or powders on the phone, as they can contaminate phone components and cause failures.

Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0 13