Chapter 2 Switch Installation
Preparing for Installation
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning The
Warning A readily accessible
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection. 10/100/1000 Ethernet Statement 1044
Warning This product requires
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of:
122°F (50°C) Statement 1047
Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last. Statement 1046
Warning No user-serviceable parts inside. Do not open. Statement 1073
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
|
| ||
|
|
