Ready LED Amber, Network LED Green, Lens | Cisco Systems WVC2300

Getting to Know the PVC2300 and WVC2300 Cameras	3
Getting to Know the PVC2300 and WVC2300 Cameras
Front Panel

Ready LED (Amber)

The Ready LED has the following states:

•Off—Camera is powered off.

•On—Camera is powered on.

•Flashing—The Ready LED will flash during start up. This will take 15 to 20 seconds.

Network LED (Green)

The Network LED has the following states:

•Off—Network connection not detected.

•On—Network connection detected.

•Flashing—Sending/receiving data.

Lens

The camera includes a removable CS-mount lens.

•For specifications on the included lens, refer to Appendix C, “Specifications.”

•For a list of recommended lenses to use with this camera, see “Camera Lens Specifications” on page 3. Also, refer to the Cisco Small Business Camera Accessories Installation and Administration Guide.

Built-in Microphone

There is a built-in microphone mounted on the front of the camera. The camera also has a connection for an external microphone on the rear. Connecting an external microphone will disable the built-in microphone.

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

10

Image 17

Cisco Systems WVC2300 manual Ready LED Amber, Network LED Green, Lens, Built-in Microphone

Contents

Administration Guide Cisco Systems, Inc. All rights reserved OL-20138-02 Connecting the Camera Planning Your Wireless NetworkIntroduction Getting to Know the PVC2300 and WVC2300 Cameras Configuring the PVC2300 and WVC2300 Cameras Installing the Camera Software Setup IP Filter Applications FTP Appendix D Where to Go From Here 114 Sample ConfigurationsAppendix a Troubleshooting Introduction Introduction Minimum Requirements Minimum System Requirements for up to eight cameras Camera Lens Specifications Camera Accessories Installation and Administration Guide Wireless Network Layout Planning Your Wireless Network Additional Security Tips Security Threats Facing Wireless NetworksPlanning Your Wireless Network Security Threats Facing Wireless Networks Planning Your Wireless Network Front Panel, Back Panel, Side Panel, page14 Front Panel Network LED Green Ready LED AmberLens Built-in Microphone Back Panel Antenna Connectors Ethernet Reset PVC2300 PoE LED Activity LED Side Panel PowerMic Spkr Out Connecting the Camera Connecting the Camera Cisco Wired Network Cisco Wireless Network Camera Hardware Installation Camera Installation Guidelines Camera Hardware Installation Connecting the Camera Color Activity Action LED Adjusting The Lens Audio Options Enabling UPnP in Appendix A, Troubleshooting Configuring the Basic Camera and Network Settings Installing the Camera Software Installing the Camera Software Installing the Camera Software WEP Setting Up the Wireless Connection on the WVC2300 Camera WPA /WPA2 Personal Installing the Camera Software Installing the Camera Software Another Network on Wired and Wireless ModesMoving the Camera to Another Network Moving the Camera to Another Network Upgrading the Camera Firmware Upgrading the Camera Firmware Launching the Web-Based Configuration Utility, Home, Setup, Launching the Web-Based Configuration Utility Home Using the Web-Based Configuration Utility Refresh SetupConnected User Log Out Icon Description Click to turn on the selected output Video Options Icons Audio on Icon Description WVC2300 Cameras SetupAudio/Video Audio on Configuring the PVC2300 and WVC2300 Cameras Configuring the PVC2300 and WVC2300 Cameras Accessing the Setup Options Device Settings Setup Basic Setup Network Settings Disable Wireless Settings WAP/WPA2 Enterprise EAP-TLS WPA/WPA2 Enterprise EAP-TTLS HTTP/HTTPS Setup Advance Setup UPnP Enable Multicast CoS BonjourQoS IP Filter Settings Setup IP Filter Administrator Administration UsersDemo User List Restore Factory Defaults Administration MaintenanceConfiguration Restart Firmware Upgrade Administration Firmware Audio/Video Video MPEG-4 SettingsMjpeg Settings Video Adjustments Mobile Settings Options Day/Night Switch Mode Audio SettingsAudio/Video Audio Setting Primary Smtp Server Applications Mail Secondary Smtp Mail Body Mail Setup Secondary FTP Applications FTPPrimary FTP Configuring the PVC2300 and WVC2300 Cameras Jabber Applications Instant Messaging Active-X Message Applications Motion Detection Configuring the PVC2300 and WVC2300 Cameras New Schedule Applications EventEvent Schedule Trigger Event Event Attachment Configuring the PVC2300 and WVC2300 Cameras Ddns Applications Ddns Input Ports Output Ports State at Power OnApplications I/O Ports Output Ports Manual Control Applications RS-485 Port SettingsPreset Position Remove Patrol Sequence Configuring the PVC2300 and WVC2300 Cameras Configuring the PVC2300 and WVC2300 Cameras Applications SMB/CIFS Status Image Status System Network WirelessStatus Network Log Type Status Syslog & LogSyslog Server Log List Video Log Status Video Log Configuring Instant Recording Sample Configurations Sample Configurations Defining Preset Positions for Patrol Sequence Using Patrol Sequence Configuring E-Mail Alerts Sample Configurations Scheduling an Event Configuring Motion Detection Area and Sensitivity Sample Configurations Configuring Port Forwarding Sample Configurations For example, http//12.19.89.2121028 Administration Users window Setting Security Precautions on the Cisco WVC2300 Questions and Answers Troubleshooting My video quality suddenly deteriorated Troubleshooting Video image is blurry Network Neighborhood/My Network Places Windows HelpShared Resources WVC2300 Camera Bandwidth Test Resolution WVC2300 Camera Bandwidth Test Resolution Resource PVC2300 Specifications Lens Specifications Alerts Network Model WVC2300 WVC2300 Specifications Management Monitoring and recording for up to 16 cameras Pin Specifications Port Specifications PIN 12VDC Product Documentation Product ResourcesSupport Cisco Small Business Where to Go From Here