Configuring the PVC2300 and WVC2300 Cameras | 8 |
|
Applications > DDNS | |
| |
| |
Applications > DDNS
From the Applications > DDNS window, you can configure Dynamic Domain Name Service (DDNS). Use this feature to access the camera from a remote location.
DDNS
•Enable DDNS—Check the box to enable DDNS. When used with a DDNS service provider, you can access your camera over the Internet using a domain name instead of an IP address.
•Service Provider—Select the service provider that you have an account with. The choices are DynDNS, TZO, and 3322. If you do not have an account, you can select a service provider and click Web Site.
•Host Name—Enter the host name (Domain Name) allocated to you by the DDNS service provider.
•Account—Enter the login name for the DDNS account.
•Password—Enter the password for the DDNS account.
•Check WAN IP Address—This option allows you to set how often the device should check to see if the Internet IP address has changed. If the IP address has changed, the DDNS server will be notified.
•Starting at—Allows you to set when to start checking if the IP address has changed.
NOTE To complete the DDNS service setup, port forwarding needs to be configured on your router. See “Configuring Port Forwarding” on page 94.
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide | 74 |
