Configuring the PVC2300 and WVC2300 Cameras

8

 

Setup > Advance Setup

 

 

 

 

 

camera. For instructions about setting up UPnP on your system, see Appendix A, “Troubleshooting.”.

Enable UPnP Traversal (Port Mapping)—When enabled will create a port forwarding rule on a NAT router automatically for opened HTTP, HTTPS, RTP, and RTPS ports.

NOTE UPnP must be enabled on the NAT router for the Enable Traversal feature to work.

Bonjour

Enable Bonjour—Enabled by default. If enabled, the camera is accessible using a Bonjour-enabled browser, such as Microsoft Internet Explorer with a Bonjour plug-in, or the Apple Mac Safari browser. By using Bonjour, you can easily find and click on Bonjour-enabled items on your network.

QoS

Enable QoS Mode—Quality of Service (QoS) mode is disabled by default. To enable the QoS mode, select this option and select either audio, video, or both for its guaranteed throughput level. Enable QoS mode will automatically enable WMM (802.11e QoS) when in wireless mode. WMM Wi-Fi Multimedia (WMM) is a standard created to define QoS in Wi-Fi networks.

DSCP—If QoS is enabled, enter the Differentiated Services Code Point (DSCP) to be used in processing QoS packets. The default value is 12.

CoS

Enable CoS Mode—Class of Service (CoS) mode is disabled by default. To enable CoS mode, check the check box.

Priority—Priority can be set to a value between 0 to 7. The highest priority value is 7.

VLAN ID—Enter the VLAN ID (1 to 4095).

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

51

Page 58
Image 58
Cisco Systems WVC2300 manual Bonjour, QoS, CoS