Configuring the PVC2300 and WVC2300 Cameras

8

 

Applications > Event

 

 

 

 

 

Trigger Event

A triggered event type is activated when a specific internal or external trigger condition is met. These triggers are:

A signal from a device connected to an input on the camera. For example, a signal from a door switch.

When movement is detected in a previously configured motion detection window.

The configuration options for trigger event are:

Enable—Check the box to perform all of the event(s) that are configured and scheduled.

Interval—Defaults to zero minutes before detecting the next event. Select the desired interval before detecting the next event. (0 min = No Delay)

Triggered by—Check the box to select a trigger option:

-Input 1/2—Describes the states that the input(s) must be in for an event to be triggered. Only one input can be used. Also, note that the states for all the inputs used must first be reached before the event will be triggered.

-Motion Detection—Movement in a motion detection window can be used to trigger events.

Action(s)—Select one or more actions to perform once a trigger event occurs. Choose from the following options:

-E-mail—If checked, an e-mail with attachments (image or video) will be delivered to the SMTP server when an alert is detected. E-mail alerts require pre-configured e-mail settings in the Applications > Mail window. See “Applications > Mail” on page 62.

-FTP—If checked, an FTP upload with attachments (image or video) will be activated to the FTP server when an alert is detected. A secondary server may also be specified, if required. This will be used if the primary server is unavailable. FTP alerts require pre-configured FTP settings in the Applications > FTP window. See “Applications > FTP” on page 65.

-SMB/CIFS—If checked, attachments (image or video) are uploaded to the NAS device defined in the Applications > SMB/CIFS window when an alert is detected. See “Applications > SMB/CIFS” on page 81.

The following SMB/CIFS settings are visible when SMB/CIFS is enabled:

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

71

Page 78
Image 78
Cisco Systems WVC2300 manual Trigger Event