Configuring the PVC2300 and WVC2300 Cameras

8

 

Applications > Motion Detection

 

 

 

 

 

Applications > Motion Detection

From the Applications > Motion Detection window, you can set the area(s) of the video image to be examined and adjust the sensitivity of detection for each area.

NOTE Motion detection cannot be configured using the Firefox browser. Internet Explorer must be used to configure motion detection.

NOTE Motion detection can be triggered by rapid changes in lighting conditions, as well as by moving objects. For this reason, it should only be used indoors.

When you first select the Motion Detection option, you are prompted to install an Active-X plug-in. It is necessary to install this plug-in to use this feature.

Active-X Message

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

68

Page 75
Image 75
Cisco Systems WVC2300 manual Applications Motion Detection, Active-X Message