Configuring the PVC2300 and WVC2300 Cameras

8

 

Applications > RS-485

 

 

 

 

 

Patrol Sequence

This feature determines how the camera will move when it is set to rotate. You can set a number of preset positions. The camera will go to the first position, then move through the list of preset positions until it is finished. The camera will stop at the last position in the list.

To create the preset sequence, select the desired Preset in the left column and click Add >>. Repeat until the desired sequence is complete.

NOTE You can add the same preset position more than once. This can be used to make the camera stay longer at one position.

To delete a position from the sequence, select the desired position and click

Remove.

Preset—Displays a list of available presets to choose from.

Sequence—Displays the order of presets in the sequence.

Add >>—Adds a preset to the sequence.

Remove—Removes a preset from the sequence.

To set the camera to rotate, follow these steps:

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

78

Page 85
Image 85
Cisco Systems WVC2300 manual Patrol Sequence, Remove