Configuring the PVC2300 and WVC2300 Cameras | 8 |
|
Applications > Event | |
| |
| |
-Enable SMB/CIFS—Check the box to enable SMB/CIFS alerts. Alerts are recorded and sent to the NAS device (SMB/CIFS server).
-Upload Path—Enter the folder name to upload alert notification to a NAS device (SMB/CIFS server).
-Login Name—Enter the user’s login name for the NAS device (SMB/CIFS server).
-Password—Enter the user password for the NAS device (SMB/CIFS server).
-Output 1/2—If checked, the output port(s) state will be activated when an alert is detected. Output port(s) alerts require pre-configured I/O port setting in the Applications > I/O Ports window. See “Applications > I/O Ports” on page 75.
-Instant Messaging—If checked, an instant message will be delivered to the Jabber server when an alert is detected. Jabber alerts require pre- configured Jabber settings in the Applications > Instant Messaging window. See “Applications > Instant Messaging” on page 67.
Event Attachment
When trigger events are enabled and an e-mail or FTP action is selected, the following options are enabled:
•Overwrite/Replace oldest video file—Check the box to overwrite and replace the oldest video clip with the current recording when detecting device’s SDRAM is full.
•Attachment Type—From the drop-down list, select the type of attachment:
-JPEG Image—Select to send image captures.
-Frame Rate—Select the desired capture rate for the JPEG image(s).
-Pre/Post Capture—Select the desired length. The snapshot(s) of the JPEG image depends on this setting, and also the file size and degree of compression.
•Video—Select to send video captures.
