Clarity WN-5040-720 manual Memory Save

Memory: Save

Press SAVE twice to open this menu directly.

ENTER

In the Save grid, use the arrow keys to cycle through the available memories. As you navigate through all 40 memories, Save Now will show (Overwrite), as shown here, if the slot already has something in it.

For each empty memory, the Name of the memory is the default name for this slot. You can change this name as described below. Many lines are grayed out because you can’t change anything here except the name of the memory. The lines in this menu are different for saving different modes: video or digital.

(Overwrite) appears if the Save to Slot number currently has something saved in it.

To save, highlight Save Now and press ENTER.

A (Current) notice will appear in Save to Slot to indicate that the save was successful and that the slot now con- tains exactly what the Margay is doing now.

To change the Name of a memory slot, highlight Name and press ENTER. A bar appears below the name which indicates character position. Use the +/– arrows to move the yellow highlight in this bar. Use the up-down arrows to change the character at that position. There are 24 character spaces available.

The default name is an abbreviation of the memory con- tents: connector used, resolution, wall configuration and wall position (if wall mode is on).

102