Clarity WN-5040-720 manual Memory What Is Saved? And Where?, Switching modes

3.5.1 Memory: What Is Saved? And Where?

Margay’s automatic memories work well, but the best way to save and recall is with the numbered memory slots, because they recall everything.

In the Margay some parameters (values) are associ- ated with the mode. The mode is primarily the hori- zontal and vertical resolution and the vertical frequency of the incoming source picture. It is more than this, but if you think of it this way, you will be close enough.

Some parameters are associated with the input. The input in this instance means the input connec- tor: Analog 1, Analog 2, Digital, Composite Video, etc.

Some parameters are global, that is, they are not associated with either the mode or the input connec- tor. They are universal.

	Specific to the
Parameter	Mode Input		Global
ASCII Response Term.			x
ASCII Response Type			x
Auto Codes			x
Auto Lamp On			x
Baud Rate			x
Beeper			x
Black Level: R, G, & B	x
Brightness (video)	x
Color Balance (all values)			x
Colorspace		x
Contrast (video)	x
Curtain Pattern			x
Do Black/White Levels			x
Do Frequency			x
Do Phase			x
Do Position			x
Frequency	x
Gamma			x
Group ID			x
Hue	x
Inverted Installation			x
Justify		x
Lamp Saver			x
Menu H Position			x
Menu Timeout			x

	Specific to the
Parameter	Mode Input		Global
Menu V Position			x
Overscan		x
Phase	x
Plug and Play (EDID)			x
Position, Horizontal	x
Position, Vertical	x
Resolution, Horizontal	x
Resolution, Vertical	x
Retry On Lost Signal			x
Saturation	x
Scale Mode		x
Sharpness		x
Terminate RS-485			x
Unit ID			x
Viewport Window Bottom		x
Viewport Window Left		x
Viewport Window Right		x
Viewport Window Top		x
Wall Height		x
Wall Mode		x
Wall Unit Column		x
Wall Unit Row		x
Wall Width		x
White Boost			x
White Level: R, G, & B	x
Zoom Window Bottom		x
Zoom Window Left		x
Zoom Window Right		x
Zoom Window Top		x

Memory

The Margay remembers that last 10 modes it received and all the mode parameters associated with them.

Switching modes

For instance, suppose you set up the Black and White Levels for a 1024x768 @ 65Hz vertical from a

64