Clarity WN-5040-720 manual Your Safety and Margay’s Safety

1.2 Your Safety and Margay’s Safety

The fully assembled display weighs about 68 lbs (30.8 kg). When assembling a wall, you will need two peo- ple to handle the Margay.

that is not available, wrap the electronics module in aluminum foil.

WARNING

The lamp needs very high voltages to start, around 15,000 volts.

WARNING

The lamp gets very hot. Allow it to cool before removing it.

WARNING

The lamp produces lots of light and UV radia- tion (ultra-violet) as well. UV light can damage your retinas. After the light leaves the lamp and passes through the DLP optical engine, there is no significant UV, although the light will be very bright.

WARNING

There is no electrical interlock on the screen. Opening the screen does not turn off the high voltage to the lamps. s

Opening the rear cover does turn off the high voltage to the lamp. However, the lamp will still be very hot.

. The plug on the power cord serves as the disconnect

for this product. No user serviceable parts inside. All parts replacement is done at the module level by a qualified service technician.

CAUTION

There are no user serviceable parts inside. Refer all repair and maintenance to a qualified service technician.

. Static electricity can damage sensitive electronic components.

•Always use a grounding strap with handling the electronics module or the optical engine if there are exposed components.

•When shipping these parts, do not use styrofoam “peanuts.” These carry static electricity and can damage the parts. Use an anti-static bag, or, if

4