Clarity WN-5040-720 manual Reading the On Screen Code, Turning on the On Screen code

5.2 Reading the On Screen Code

Red and amber lights flashing on the screen can tell you what is wrong.

Turning on the On Screen code

With the remote control, press MONITOR. You should see the red or amber lights flashing on the screen. This also opens the Display Status menu, but of course, you won’t see it if the lamp is off.

If there is a bright picture, it may be difficult to see these lights. They are soft, out of focus lights. Move around to see them.

Or, press CURTAIN to make the screen black so they will be easier to see.

If you see a steady, unblinking, amber light, it means the lamp is on and there are no alarm condi- tions. If the screen is black at this time, there are other reasons for it being black:

•The curtain is on and black.

•The source itself is a black picture.

•There is no source, which turns the screen black.

•There is some foreign object blocking the light path.

Automatic On Screen code display

If Auto Codes is checked in the Miscellaneous menu, the code will start showing whenever there is a fault event that forces the lamp off.

80