Clarity WN-5040-720 manual Connections, Video Sources, Video is a option installed in the field

2.5 Connections

2.5.2 Connections, Video Sources

Video is a option installed in the field.

If you did not install the optional Video Input Module (VIM), skip this section. (2.2 “Installing the VIM (Video Input Module)” on page 10)

Composite video

Connect an NTSC, PAL, or SECAM composite source to COMPOSITE IN. Loop-thru from COMPOSITE

OUT.

S-video

Connect an NTSC or PAL S-video source to the 4-pin DIN connector, S-VIDEO IN.

Component video

NTSC or PAL rate interlaced video can be fed into the Y, Pb, and Pr IN connectors and looped out. Be sure the DVD player is not set to progressive scan. Use the Analog 1 or 2 connector for progressively scanned DVD.

When you choose Component Video in the Picture menu, the Colorspace automatically switches to YPbPr. When you choose another picture source, Colorspace switches back to RGB.

Component video YPbPr sources can also be fed into the Analog 1 or Analog 2 inputs. Colorspace must be manually changed to YPbPr in this case.

•Use RGB when the analog source is normal RGB.

•Use YPbPr when the source is component analog.

The Analog inputs have a greater range of modes for component than the YPbPr video inputs. If your YPbPr source does not work in the video inputs, try Analog 1 or 2.

24