Clarity WN-5040-720 manual Selecting a Source, Selecting the source

4.1 Selecting a Source

The “source” is the picture coming into the Margay. It may be from a computer, a video, or a DVD player.

Selecting the source

1.Press MENU on the remote.

2.Select PICTURE and press ENTER.

3.Select SOURCE and press the lEFT ARROW key.

4.Choose the source you want and press ENTER.

5.Press MENU again to close all menus.

Selecting a source means choosing an input connec- tor so you can see the picture coming into that input.

If the source you select is not there, you will see a Source Absent message on the screen. This usually means there is no picture coming into that connector, or the picture is not valid.

This message means Analog 2 is selected now, but there is no picture coming to that connector.

68